UniFIT Floor 
Definition
UniFIT Floor is a wood chipboard with a tongue and groove profile on four or two faces. This board is suitable for structural applications in humid conditions, in accordance with service class 2 according to standard EN 1995-1-1:2004.
Description
UniFIT Floor is a three-layer board with a very highly densified centre core and a symmetric tongue and groove profile. During the manufacturing process, the MUF glue is compressed with the flax clay at a high temperature and the glue is distributed evenly to ensure optimum adhesion. The high strength properties, the tongue and groove system and the water-repellent properties make UniFIT Floor particularly well suited for floor systems in the construction industry and roof element applications. UniFIT Floor is made of wood from sustainable, managed forests of non-controversial origin.
Properties
Applications
UniFIT Floor is made for the professional construction industry and can be installed horizontally as well as vertically. As such, UniFIT Floor is used for roof and floor structures or to seal insulation or room partition walls. Thanks to the symmetric tongue and groove profile, individual boards can be mutually rotated.
Range and options| Standard range |
| Substrate |
P5 |
| Available thicknesses |
18 and 22 mm |
| Available dimensions |
2440 x 1220 mm (2 faces tongue and groove) |
| 2440 x 610 mm (4 faces tongue and groove) |
Other thicknesses, qualities and dimensions are available on request. For further information, please contact your sales representative or the general address at sales.panels@unilin.com.
On request, UniFIT Floor is also available with an extremely low formaldehyde content under product reference name UniFIT Floor BIO.
Technical properties| PROPERTY |
TEST METHOD |
UNIT |
VALUE |
| Thickness tolerance (Sanded) |
EN 324-1 |
mm |
+/- 0,3 mm |
| Thickness tolerance (Unsanded) |
EN 324-1 |
mm |
- 0,3 mm <> +1,7mm |
| Tolerance on nominal dimensions |
EN 324-1 |
mm |
+/- 5mm |
| Edge straightness tolerance |
EN 324-2 |
mm |
1,5mm per m |
| Squereness tolerance |
EN 324-2 |
mm |
2,0mm per m |
| Moisture content |
EN 322 |
% |
5-13% |
| Tolerance on the mean density within the board |
EN 323 |
% |
+/- 10% |
| Tolerance on density (between 2 boards) |
EN 323 |
% |
+/- 5% |
| Formaldehydeclass (6,5% moist) |
EN 120 |
mg/100g DS |
E1 <8mg/100g DS |
| PROPERTY |
TEST METHOD |
UNIT |
VALUE |
| Thickness |
EN 324 - 1 |
mm |
18 |
22 |
| |
Type |
|
SD |
SD |
| Density |
EN 323 |
kg/m³ |
700 |
660 |
| Bending Strenght |
EN 310 |
N/mm² |
16,0 |
14,0 |
| Modulus of elasticity |
EN 310 |
N/mm² |
2.400 |
2.150 |
| Tensile strength - V20 |
EN 319 |
N/mm² |
0,45 |
0,40 |
| Tensile strength - after V100 |
EN 1087-1 |
N/mm² |
0,14 |
0,12 |
| Tensile strength - after V313 |
EN 321 |
N/mm² |
0,22 |
0,20 |
| Thickness swelling after 24 hours |
EN 317 |
% |
10 |
10 |
| Thickness swelling after V313 |
EN 321 |
% |
12 |
11 |
Certificates
The Unilin Panels division is actively committed to sustainable forest management. Which is why our wood chipboard materials are available with PEFC and FSC® labels on request.
The manufacturing of UniFIT Floor meets the requirements as specified in ISO standard 9001:2008 and the products are fully compliant with European standard EN 13986:2004.
For further information on CARB 2 by UniFIT Floor products, please contact our sales department at sales.panels@unilin.com.
Download: UNIFIT_FLOOR_ENG.pdf