ConstructionInteriorDecorsSample serviceDealersInspirationDownloads

Liso

Basic board for general applications in dry environments
  • Description
  • Applications
  • Technical specifications
  • Stock range
  • Characteristics

Liso chipboard is a standard solution for general applications in dry environments.
This board is suitable for use in service class 1 (limited temperature and relative humidity), and can only be used in biological hazard class 1 of EN Standard 335-3.

Liso is available with both a sanded surface and a TopFinish surface. 
The heat-treated TopFinish surface (TF) creates an extra-hard, sealed surface with greater impact resistance, which is easy to clean. This means that boards with a TopFinish surface are particularly suitable for building applications such as concrete formwork. 
A fine, sanded surface (SA) is recommended if the Liso board is going to receive an additional finish of melamine, finishing foil, lacquer, veneer or laminate, as is often the case in interior applications.

Liso chipboards are a robust solution for non-load bearing applications including packaging and interior fittings.

General characteristics + Norm Unit Average values
Thickness EN 324-1 mm 8 10 12 16 17 18 19 22
Moisture level EN 322 % 6-10
Technical characteristics + Norm Unit 5/95 percentile values
Bending strength EN 310 N/mm² 10,5 10,5 10,5 10 10 10 10 10
Internal bond EN 319 N/mm² 0,28 0,28 0,28 0,24 0,24 0,24 0,24 0,20
Sanded Quantities per pack
Thickness EN 324-1 8 10 12 16 17 18 19 22
2500x1250 96 90 80 60   50   40
2800x2070 50 50 48 36     30 27
3050x1250   80   50   44    
TopFinish Quantities per pack
2500x1250         55      

Please contact our sales team for more information about the technical capabilities regarding custom thicknesses and dimensions, and for minimum order requirements.

Norm
P1
General applications in dry conditions
Material type
Chipboard

Finishes
Sanded
A fine, sanded surface (SA) is recommended if the board is going to receive an additional finish of melamine, finishing foil, lacquer, veneer or laminate, as is often the case in interior applications.
TopFinish
The heat-treated TopFinish surface (TF) creates an extra-hard, sealed surface with greater impact resistance, and it is easy to clean. The increased concentration of natural paraffin in the surface increases its moisture resistance. Our boards with a TopFinish surface also score highly for air tightness. These advantages mean that boards with a TopFinish surface are particularly suitable for building applications.

Downloads