Moisture-resistant, multifunctional construction board
Description
Applications
Technical specifications
Stock range
Characteristics
Durelis is an MUF-glued, versatile, moisture-resistant chipboard suitable for load-bearing applications. As an excellent alternative to traditional OSB/3 boards, Durelis is suitable for applications in environments with a high relative humidity level.
Durelis’ unique composition ensures that swelling and linear expansion remain limited.
These construction boards can be used in service class 2 (limited temperature and relative humidity) and can only be used in biological hazard classes 1 and 2 of EN Standard 335-3.
Durelis is available with a sanded surface or a TopFinish® surface.
The heat-treated TopFinish surface (TF) creates an extra-hard, sealed surface with greater impact resistance, which is easy to clean. The increased concentration of natural paraffin in the surface increases its moisture resistance. Our boards with a TopFinish surface also score highly for airtightness. These advantages mean that boards with a TopFinish surface are particularly suitable for building applications.
A fine, sanded surface (SA) is recommended if the Durelis board is going to receive an additional finish of melamine, finishing foil, lacquer, veneer or laminate, as is often the case in interior applications.
Durelis is available as standard with straight edges, but can also be finished with a tongue-and-groove system (TG). The toothed profile ensures high stability and simple installation. The system makes it possible to nail or screw the panels blind.
Durelis can be used in both traditional housing construction and timber construction as a structural construction board for floors, roofs or walls. This board is also useful for non-load bearing applications, such as interior fittings in zones with a high relative humidity.
Furthermore, it works perfectly as single use or multi use concrete formwork.
General characteristics + Norm
Unit
Average values
Thickness EN 324-1
mm
10
11
12
13
15
16
18
19
20
21
22
25
28
Moisture level EN 322
%
6-10
Technical characteristics + Norm
Unit
5/95 percentile values
Bending strength EN 310
N/mm²
18
18
18
18
16
16
16
16
16
14
14
14
12
Internal bond EN 319
N/mm²
0,45
0,45
0,45
0,45
0,45
0,45
0,45
0,45
0,45
0,40
0,40
0,40
0,35
Bending stiffness EN 310
N/mm²
2550
2550
2550
2550
2400
2400
2400
2400
2400
2150
2150
2150
1900
Swelling/24h EN 317
%
13
11
11
11
10
10
10
10
10
10
10
10
10
Internal bond after cyclic test EN 321 option 1
N/mm²
0,25
0,25
0,25
0,25
0,22
0,22
0,22
0,22
0,22
0,20
0,20
0,20
0,17
Swelling/24h EN 317
%
12
12
12
12
12
12
12
12
12
11
11
11
10
TopFinish uncoloured
Quantities per pack
Thickness EN 324-1
10
11
12
13
15
16
18
19
20
21
22
25
28
3960x1218
52
Sanded
Quantities per pack
2500x1250
90
80
60
50
40
3050x1250
64
50
44
30
Tongue and groove
Quantities per pack
2040x910
45
40
35
2400x600
100
80
2440x610
150
100
80
2440x1220
50
40
TopFinish
Quantities per pack
2500x1250
90
80
80
64
48
45
40
40
3050x1250
44
3960x1218
52
2800x1196
90
72
66
60
Please contact our sales team for more information about the technical capabilities regarding custom thicknesses and dimensions, and for minimum order requirements.
A fine, sanded surface (SA) is recommended if the board is going to receive an additional finish of melamine, finishing foil, lacquer, veneer or laminate, as is often the case in interior applications.
TopFinish
The heat-treated TopFinish surface (TF) creates an extra-hard, sealed surface with greater impact resistance, and it is easy to clean. The increased concentration of natural paraffin in the surface increases
its moisture resistance. Our boards with a TopFinish surface also score highly for air tightness. These advantages mean that boards with a TopFinish surface are particularly suitable for building applications.
Tongue and groove
The tongue and groove profile ensures high stability and simple installation. The system makes it possible to nail or screw the panels blind.
