ConstructionInteriorDecorsSample serviceDealersInspirationDownloads

BetonSpan P5

Moisture-resistant, structural board with smooth protection layer, for re-usable concrete formwork
  • Description
  • Applications
  • Technical specifications
  • Stock range
  • Characteristics
BetonSpan P5 is an MUF-glued, high-density chipboard. The boards have a vapour-proof smooth protection layer on both sides.

BetonSpan P5 only undergoes minimal expansion and swelling under the influence of high relative humidity.
When used with suitable dismantling oil, BetonSpan P5 is an ideal concrete formwork board for repeated use.

To prevent bending, appropriate support for the board is recommended. Avoid the side edges coming into direct contact with water and always use appropriate tools when sawing, milling or drilling.

BetonSpan P5 is not suitable for permanent installation in service class 3 environments. 

General characteristics + Norm Unit Average values
Thickness EN 324-1 mm 18
Moisture level EN 322 % 6-10
Technical characteristics + Norm Unit 5/95 percentile values
Bending strength EN 310 N/mm² 16
Internal bond EN 319 N/mm² 0,45
Bending stiffness EN 310 N/mm² 2400
Swelling/24h EN 317 % 10
Internal bond after cyclic test EN 321 option 1 N/mm² 0,22
Swelling/24h EN 317 % 12
Melamine Quantities per pack
Thickness EN 324-1 18
2500x1250 50
Please contact our sales team for more information about the technical capabilities regarding custom thicknesses and dimensions, and for minimum order requirements.
MR
MR
Use in humid conditions
Structural
For structural applications
Norm
P5
Load-bearing applications in humid conditions
Material type
Chipboard

Downloads